Overflow Control, Model OC-2

water tank overflow controller

Check Price | See Demo | Save Information | Buy Now

      • Control Function
      • It eliminates overflows. 
      • It automatically stops water pump when overhead water tank reaches full level.
      • Motor start remains manual from green push button on motor starter box panel
      • Control Application
      • For single phase (220vac) input supply pumps
      • For double push starter operated pumps, please click here to know more about starters 
      • For pump sets up to 3 Hp power (max. 15 Amps starting load)
      • Pumping up overhead raw water storage tanks
      • Important Features
      • Water tank full, half & low water level indications on panel.
      • Auto select toggle switch to disable auto stop function, if needed.
      • Pre-connected maintenance free water sensor set to suit most water tanks.
      • Control for single phase, double push (green to start / red to stop) switch operated pumps.
      • Easy to understand & install with color coded input, output and sensing signal connections.
      • Water Sensor Set
      • Maintenance free water sensors, for raw (unprocessed tap/ground/ sea) water.
      • Not suitable for processed (Dm/ Ro) waters and waste (sewage / storm/ sludge) water.
      • Suitable for use in water at normal ambient temperatures (5- 50 degree Celsius).
water level sensor set3
      • Installation & Connections
      • Main control unit must be installed at a place safe from rain water and splashes.3
      • Water sensors should be placed in freely hanging position in water tank (no fixing required).
      • 2 pair telephone signal wire .40mm copper recommended for use as signal wire.


Check Price | See Demo | Save Information | Buy Now

Note: demo video shall be available soon, please check back or click here to contact us