top of page
Search

Testing & Setup Videos
Here is visual walkthrough to get you up and running in minutes. How to setup and test various device model is explained step-by-step.


Testing - Overflow Alarm
Model OCA OBS OAP Testing an overflow alarm is a straightforward process. Simply connect the red signal wires coming out from the alarm...

Bhupinder Singh
Sep 14, 20241 min read
Â
Â
Â


Testing - Auto Level Control Model ALC-2
This videos explains how this automatic water level control can be tested with and without water senors. This video is useful in trouble...

Bhupinder Singh
Aug 27, 20241 min read
Â
Â
Â


Setup - Auto Level Control Model ALC-2
SensaSwitch ALC-2 is an advanced automation for heavy duty 220 volts opertaed motors operated by double push button starters. For a smooth setup it is essential that control model is choosen after consultation with sensaswitch helpline 9814055314. The video below explains installation and connections of main control device. Important Instructions For Setup Services of a qualified technician are required to set up this device as the setup requires good knowledge and understand

Bhupinder Singh
Aug 27, 20241 min read
Â
Â
Â


Setup - Auto Water Level Control Model - AWLC-1
SensaSwitch-AWLC water level control is fairly easy to install as its connection leads has been properly marked, color matched and housed to make installing and connecting a straightforward. Input supply wire is is ready to plug in with 3 pin plug, output terminals are safely housed in 2pin terminal strip. Upper tank and lower tank sensor connectors 3 pin connectors are color matched with red and blue sleeves, and will connect only in correct manner. The video shows setup st

Bhupinder Singh
Aug 21, 20241 min read
Â
Â
Â


Testing - Auto Overhead Level Control Model AOLC-1
The functionality of the AOLC-1 device can be tested by utilizing the three sensor signal wires (white, blue, and red) that are coming...

Bhupinder Singh
Aug 15, 20241 min read
Â
Â
Â


Testing - Overflow Auto Stopper Model OASC-1
Testing Overflow Auto Stopper is a straightforward process. Once the motor is started by pressing the green button on OASC-1, simply...

Bhupinder Singh
Aug 15, 20241 min read
Â
Â
Â


Setup - Auto Overhead Level Control Model AOLC-1
The video demonstrates the installation and connection of an overflow auto stop to a motor switch/starter. It covers topics such as input supply, motor connections to device output, and sensor setup. Moreover, the video emphasizes that the installation process is straightforward and can be carried out by any qualified electrician. Important Notice: The AOLC devices are designed to be connected specifically to a single switch, a 220-volt motor or starter box. To prevent any po

Bhupinder Singh
Aug 14, 20241 min read
Â
Â
Â


Setup - Overflow Auto Stopper Model OASC-1
The video demonstrates the installation and connection of an overflow auto stop to a motor switch/starter. It covers topics such as input supply, motor connections to device output, and sensor setup. Moreover, the video emphasizes that the installation process is straightforward and can be carried out by any qualified electrician. The following diagram explains the overall set up of overflow auto stop. Here is a comprehensive step-by-step setup guide. Kindly click the link be

Bhupinder Singh
Aug 14, 20241 min read
Â
Â
Â
bottom of page